Automatic Power Selector
The Automatic Power Selector (APS) is a solid state device which enables installation of a seamless, redundant power system for critical electronic loads. It selects the higher voltage of two isolated DC power sources and routes power to the load. Should one source falter or fail, the other will automatically supply the load with no transfer delay, operation continues uninterrupted.
Easy installation, two independent power sources are wired to the APS and routed in a single output to the vital load.
| Model | Voltage Rating | Peak Load Current | Size | Weight |
|---|---|---|---|---|
| APS-70 | 6-50 VDC, neg. ground | 70 amps | 3.25″ x 4.5″ x 3.1″ | 2 lbs. |
| APS-160 | 6-50 VDC, neg. ground | 160 amps | 9.0″ x 4.5″ x 3.1″ | 5 lbs. |
Voltage Rating: 6-50 VDC, neg. ground
